everydrop by Whirlpool Ice & Water Refrigerator Filter 3 – EDR3RXD1, Aqua
Price range: $27.99 through $99.99
- Reduces 73 contaminants including lead, pesticides and microplastics
- NSF/ANSI 42, 53 & 401 certified for specific contaminant reduction
- Lasts 6 months or 200 gallons per filter
- Tool-free, push-in installation
Clean, Fresh-Tasting Water with the everydrop EDR3RXD1
The everydrop by Whirlpool Ice & Water Refrigerator Filter 3, EDR3RXD1, is certified to reduce 73 contaminants, including lead, pesticides, pharmaceuticals and microplastics. It is certified by NSF International to NSF/ANSI Standards 42, 53 and 401 for specific contaminant reduction.
Filter 3 is the aqua filter. It pushes into place without tools, so changing it every six months takes only a few minutes and keeps your water and ice tasting fresh.
Is It Time to Replace Your Filter?
A worn-out filter stops doing its job long before it stops fitting. These are the usual signs:
- It has been six monthsThe recommended change interval, even if water still looks clear.
- The indicator light is onMost compatible refrigerators remind you when the filter is due.
- Water tastes flat or of chlorineA sign the carbon is no longer reducing taste and odor well.
- The dispenser has slowed downReduced flow often means the filter media is loaded.
How the EDR3RXD1 Filter Works
everydrop Filter 3 uses Triple Filtration Technology built around a coconut shell-based activated carbon core. Water passes through three stages:
-
Particle filtration
Captures larger particles such as sediment.
-
Micro filtration
Traps medium-size particles, including microplastics.
-
Adsorption
The activated carbon attracts and holds microscopic contaminants, including those that affect taste and odor.
Certified by NSF International under NSF/ANSI Standards 42, 53 and 401 to reduce specific contaminants. Learn about these standards from NSF International.
Will the EDR3RXD1 Fit Your Refrigerator?
everydrop Filter 3 is made for refrigerators that use Filter 3, mostly side-by-side models with the filter in the base grille.
Compatible brands
- Whirlpool
- Maytag
- KitchenAid
- Amana
- JennAir
Replaces these filter numbers
- 4396841
- 4396710
- 4396842
- W10193691
- Kenmore 9083
- Kenmore 9030
- Filter 3
How to check before you order
Look at the number printed on your current filter, or check for the aqua cap. Filter 3 is usually behind the base grille at the bottom front of the refrigerator, on the left side.
everydrop Filters 1, 2 and 3 are not interchangeable. If you are unsure, check your refrigerator owner’s manual. Need a different one? See Filter 1 (purple) or Filter 2 (orange).
EDR3RXD1 Product Specifications
| Brand | everydrop by Whirlpool |
|---|---|
| Model number | EDR3RXD1 |
| Also known as | everydrop Filter 3, Ice & Water Refrigerator Filter 3 |
| Replaces | 4396841, 4396710 |
| Color | Aqua |
| Filter media | Coconut shell-based activated carbon |
| Certifications | NSF/ANSI 42, 53 and 401 |
| Contaminants reduced | 73, including lead, pesticides and microplastics |
| Filter life | 6 months or 200 gallons |
| Installation | Push-in, tool-free |
| Size | About 13.5 x 2.5 x 2.5 inches |
| UPC | 883049361161 |
How to Replace Your Filter 3
-
Find the filterLook behind the base grille at the bottom front of the refrigerator, on the left side.
-
Remove the old filterPress the eject button and pull the old filter straight out. Keep the cap from the old filter. No tools are needed.
-
Insert the new EDR3RXD1Remove the protective coverings from the O-rings, twist the cap onto the new filter until it locks, then push the filter in until the eject button pops back out.
-
Flush and resetDispense water for several minutes to clear air from the line, then reset the filter indicator light if your model has one.
A little cloudiness or sputtering right after installing is trapped air and clears as you flush the filter.
Save With EDR3RXD1 Multi-Packs
Each filter lasts about six months, so a multi-pack keeps your next replacement ready and lowers the price per filter.
[ff_pack_table]Frequently Asked Questions
How often should I replace the EDR3RXD1 filter?
Every six months or 200 gallons, whichever comes first. Replace it sooner if water flow slows or the taste of your water or ice changes.
Is EDR3RXD1 the same as 4396841?
Yes. everydrop Filter 3, EDR3RXD1, replaces filter 4396841 and the older 4396710.
Can I use Filter 1 or Filter 2 instead?
No. Each everydrop filter number has a different shape and connection. Use the filter your refrigerator is designed for.
Do I need tools to install it?
No. You press the eject button to release the old filter, move the cap to the new one, and push it in by hand.
Why is my water cloudy after installing a new filter?
That is air trapped in the new filter and the water line. Dispense water for several minutes and it clears.
How much does shipping cost?
Shipping is free on every order to addresses in the United States.
Ready for Fresher Water?
Choose a pack and keep your next EDR3RXD1 filter on hand.
Looking for other replacements? Browse all refrigerator water filters or visit the filterfit shop. filterfit is an independent retailer. everydrop and Whirlpool are trademarks of Whirlpool Corporation. filterfit is not affiliated with or endorsed by Whirlpool Corporation.
| Pack Size | 1 Pack, 2 Pack, 3 Pack, 4 Pack |
|---|
Be the first to review “everydrop by Whirlpool Ice & Water Refrigerator Filter 3 – EDR3RXD1, Aqua”
Related products
Refrigerator Water Filters
everydrop by Whirlpool Ice & Water Refrigerator Filter 4 – EDR4RXD1, Green
Refrigerator Water Filters
everydrop by Whirlpool Ice & Water Refrigerator Filter 2 – EDR2RXD1, Orange
Refrigerator Water Filters
everydrop by Whirlpool Ice & Water Refrigerator Filter 1 – EDR1RXD1, Purple
Reviews
There are no reviews yet.